25 common CCTV terms and acronyms & what they mean…

Jargon Buster... for CCTV cameras!

 A bit unsure what some of those unusual terms and pesky acronyms actually mean when you come across them? Well here’s a quick guide to help you….

 

AGC – Automatic Gain Control is a handy feature that automatically adjusts the Video amplitude under various lighting conditions. If the Gain is manually set too high, it can produce a noisy image in low light conditions.


AI – Auto Iris is a moving part of the lens that allows it to automatically open or close to vary the amount of light reaching the CCD so it can handle varying lighting conditions better without any manual adjustment. Great feature for external cameras operating in day to night conditions.


AWB – The Automatic White Balance setting controls the automatic adjustment of the light source’s colour temperature, which will adjust the picture’s colour to maintain the “best” image by keeping white objects white and so on.


BAUD RATE – The Baud Rate is the number of symbols or waves made in a transmission signal per second. Used as a setting between PTZ devices such as cameras and keypads to allow them to transmit to each other effectively. The lower the rate that can be selected the further the transmission distance without errors.


BLC – Back Light Compensation allows the camera to adjust the exposure of the entire image to properly expose the subject in the foreground when a bright light source is situated behind it.


CCD – Charge Coupled Device –  the main component of a CCTV camera, this converts light energy into an electrical charge which is then converted to an electrical image.


CMOS – Complementary metal–oxide–semiconductor works in a similar way to CCD but produces a lower quality image.


DNR – Digital Noise Reduction is the process of removing image noise from the video signal by applying a digital filter. A 2d filter reduces noise in low light images, a 3d filter reduces noise caused by movement giving less motion blur.


dB deciBel – A unit of measurement for the Signal-Noise ratio. The higher the value, the better & crisper the camera’s picture & sound. Usually from 48 to 52 dB.


DSP – Digital Signal Processing allows access to additional features within a camera like WDR, BLC, RS485 (see other terms for full explanations)


Dual Voltage – Cameras with dual voltage options can accept either 24V AC or 12V DC power sources. Using 24V AC is a good option for longer cable runs as less volt drop occurs over the cable length.


F NUMBER or F Stop – Is the aperture or opening of the lens that describes the amount of light the lens lets in. The lower the number the better.


IR LED – Produces infra-red illumination invisible to the human eye but visible to IR sensitive cameras.


NiteDevil – A function that allows a slower shutter speed in order to let in more light to provide higher sensitivity in low light conditions.


NTSC – The video signal standard for North America and Japan.


OLPF – Optical Low Pass Filter removes the ‘Moire’ effect created by checked patterns in an image


OSD – A menu system that allows configuration of camera parameters.


PAL – The video signal standard for Europe.


PTZ – Pan, Tilt and Zoom – a term used for cameras that have the ability to rotate and angle itself to look at a given area. The Zoom function is from the lens of the camera zooming in and out to focus on an object.


RS485 – A serial data standard in which data is sent typically down a pair of wires (Twisted Pair/CAT5) to send control commands to devices.


TVL – TV Lines indicate the maximum amount of individual vertical lines capable of being produced by equipment. The higher the better resolution and image quality.


VMD – Video Motion Detection detects changes between subsequent frames of video specifically looking for changes within defined ‘Region of Interest’.


WDR – Wide Dynamic Range digitally adjusts the exposure in areas of the frame to maintain optimum levels in both the dark and bright areas of an image.


HD-TVI – HD stands for High Definition, and TVI stands for Transport Video Interface, this is set to be the new “face” of CCTV and the latest global standard for HD CCTV.


IP – Internet protocol camera, or IP camera, is a type of digital CCTV camera which can send and receive data down a computer network and over the Internet.


Advertisements

2 thoughts on “25 common CCTV terms and acronyms & what they mean…

  1. Can’t get a picture on CCTV camres when away from home I had a new rooter put in a few months ago
    . When at home they are fine . Thank you for your help.
    Steve

Comments...

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s